JAMO Satellite Radio PRO OE4BS User Manual

Model PRO-OE4BS  
Transmitter Programming Guide  
This transmitter makes use of icons (symbols) to identify the reaction your  
system will have when any icon (button) is pressed. These icons are  
programmed at time of installation to meet the needs of the individual and to  
complement the vehicle that the system is installed in. To replace a transmitter  
or add transmitters, please follow the programming instructions listed on the  
pages of this manual.  
RECEIVER  
CHANNEL  
SYSTEM FUNCTION  
BUTTON  
Lock and arm.  
Also remote panic if alarm system is installed  
1
Unlock and disarm.  
With 2 step unlock option, press a second  
time for all doors.  
2
Remote panic if alarm system is installed  
Press and hold for optional trunk release  
activation, press 2 times to activate remote  
start.  
3
4
Press and release for optional device, press  
and hold for extended output.  
OPTION  
NOTE: Additional devices or a second vehicles may be programmed to  
operate by pressing a combination of buttons shown below, check  
with your installation center for programming these additional  
functions or features.  
q
q
q
q
q
Lock + Unlock  
Lock + Trunk  
Unlock + Trunk  
Lock + Opt.  
q
q
q
q
q
Lock + Unlock + Opt.  
Lock + Unlock + Trunk  
Unlock + Opt. + Trunk  
Lock + Opt + Trunk  
Unlock + Opt.  
Lock + Unlock + Trunk + Opt.  
128-5868  
1 of 6  
Released 9-8-00.  
 
"Repeat step 4 for each transmitter you wish to program".  
NOTE: Any button(s) of the transmitter may be used in place of the lock  
symbol button for channel 1, however using the proper symbol  
will obviously be less confusing for the consumer.  
5) Press and release the valet push-button program switch once to ad-  
vance to channel 2. The dash mounted LED will Flash 2 times, indicat-  
ing that the unit is ready to accept programming for the disarm/unlock  
channel # 2.  
6) Press and hold the unlock symbol button of the transmitter you wish to  
program for 4 seconds or until a long chirp is heard from the siren, or the  
interior/parking lights flash.  
"Repeat step 6 for each transmitter you wish to program".  
NOTE: Any button(s) of the transmitter may be used in place of the unlock  
symbol button for channel 2, however using the proper symbol will  
obviously be less confusing for the consumer.  
7) Press and release the valet push-button program switch once to ad-  
vance to channel 3. The dash mounted LED will Flash 3 times, indicat-  
ing that the unit is ready to accept programming for the trunk release/  
remote start, channel # 3 output.  
8) Press and hold the trunk/key symbol button of the transmitter you wish  
to program for 4 seconds or until a long chirp is heard from the siren, or  
the interior/parking lights flash.  
"Repeat step 8 for each transmitter you wish to program".  
NOTE: Any button(s) of the transmitter may be used in place of the trunk  
symbol button for channel 3, however using the proper symbol will obvi-  
ously be less confusing for the consumer.  
9) Press and release the valet push-button program switch once to ad-  
vance to channel 4. The dash mounted LED will Flash 4 times, indicat-  
ing that the unit is ready to accept programming for optional device  
connected to channel # 4.  
10) Press and hold the option button of the transmitter you wish to program  
for 4 seconds or until a long chirp is heard from the siren, or the interior/  
parking lights flash.  
"Repeat step 10 for each transmitter you wish to program".  
3
128-5868  
3 of 6  
 
NOTE: Certain systems may have additional receiver channels, if your  
unit exits the program during the next press of the pushbutton  
switch, your system has 4 channels only, if when you press valet  
push-button program switch once to advance to channel 5. The  
dash mounted LED will Flash 5 times, indicating that the unit is  
ready to accept programming for the 5th channel option.  
Press and hold any unused button combination as indicated on the front  
cover of this manual for 4 seconds or until a long chirp is heard from the  
siren, or the interior/parking lights turn flash.  
NOTE: Certain systems may have additional receiver channels, if your  
unit exits the program during the next press of the pushbutton  
switch, your system has 5 channels only, if when you press valet  
push-button program switch once to advance to channel 6. The  
dash mounted LED will Flash 6 times, indicating that the unit is  
ready to accept programming for the 6th channel option.  
Press and hold any unused button combination as indicated on the front  
cover of this manual for 4 seconds or until a long chirp is heard from the  
siren, or the interior/parking lights turn flash.  
NOTE: Panic is pre-assigned to operate with the lock button and unlock  
buttons of the transmtter. Please see owners manual for addi-  
tional information under the heading Panic Feature.  
128-5868  
4 of 6  
 
BATTERY REPLACEMENT:  
The transmitter incorporates a small LED visible through the case which  
is used to indicate battery condition. You will notice a decrease in operat-  
ing range as the battery condition deteriorates. To replace the battery:  
1) Remove the small # 0 phillips head screw from the rear of the case.  
2) Remove the top cover to access the discharged battery paying atten-  
tion to the proper polarity orientation.  
3) Remove and properly dispose of the discharged battery.  
4) Insert the new battery, close the case, then reinstall the small case  
screw removed in step 1.  
GP 27 A Battery  
5
128-5868  
5 of 6  
 
ORDER FORM FOR 4 BUTTON  
TRANSMITTER MODEL NO. PRO-OE4BS  
Important: To help us expedite your order, please print all of the  
information legibly and mail this form and your payment  
according to the instructions below.  
Note: Order PD-40 for Blue transmitter buttons.  
Order PD-41 for Red transmitter buttons.  
1) Pad Number:_____________________________________  
2) Name: __________________________________________  
3) Address: ________________________________________  
4) City:____________ State: ____ Zip Code: __________  
5) Telephone Number: (  
)
6) Total Number Of Transmitters Required:  
Cost Per Transmitter is:  
Multiply By Number Of Transmitters  
7) Enter Total Amount Enclosed  
$65.00  
X
(New York State Residents must include the appropriate sales tax)  
8) Method of Payment:  
Mastercard  
Visa  
Check or Money Order  
(do not send cash)  
Make Checks Payable To Audiovox Corporation  
Credit Card Number: _________________________________  
Credit Card Expiration Date:  
/
/
9) Mail this form along with your payment to:  
Audiovox Electronics Corp., 150 Marcus Blvd. Hauppauge, NY, 11788  
Attn.: TRANSMITTER DEPARTMENT  
128-5868  
128-5868  
6 of 6  
 

Ingersoll Rand Heat Pump 650500 B User Manual
JustCom Technology Switch JC M102U User Manual
JVC Computer Drive LST0580 001A User Manual
JVC MP3 Player HR XVC33U User Manual
JVC VCR HR A43U HR A63U User Manual
Kambrook Iron KI730 User Manual
Kenmore Water Heater 153331761 User Manual
Kenwood DVD VCR Combo KVT 839DVD User Manual
Kenwood Food Processor FPM800 User Manual
Konica Minolta Digital Camera DiMAGE Xi User Manual